當前位置：上海萬捷科技有限公司>>瑞士萬通METROHM>>PH計/酸度計/電導計>>瑞士萬通712 型電導儀

瑞士萬通712 型電導儀

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地上海市

在線詢價 收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2025-01-13 11:03:26瀏覽次數：41次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

  瑞士萬通METROHM

離子色譜

庫侖法卡爾費休水份測定儀

PH計/酸度計/電導計

容量法卡爾費休水份測定儀

電極/配件/耗材

雙鉑絲指示電極

Metrohm參比電極

滴定杯干燥管

全自動電位滴定儀

一體式電位滴定儀

伏安極譜儀

萬通離子在線分析儀

復合pH玻璃電極

全部產品列表

暫無信息

上海萬捷科技有限公司

經營模式：其他

商鋪產品：206條

所在地區：

詢價 給他留言

產品簡介

712 型電導儀產品廣泛用于建筑、通信、電力、電子、化工、機械等域,712 型電導儀產品通過了認證,易電712 型電導儀產品是生產企業的配套品牌之。

詳細介紹

瑞士萬通712 型電導儀的詳細資料：

Conductivity measurement has top priority when the quality of water samples needs to be checked. Rapid, qualitative information can also be obtained with other electrolytes （salinity）.
A wide range of uses
Conductivity measurements in the range 0.001 µSiemens/cm to 20 Siemens/cm with automatic range switching
Two lines of 16 alphanumeric characters each are available for the sample identification
A typical GLP component: The last calibration of the measuring cell and the last determination of the temperature coefficient can be verified
Designation and serial number of the instrument as well as date and time appear on the printout
Measurement ranges specially designed for conductivity titrations with compensation
Temperature measurement from -170 °C to 500 °C
TDS measurements （Total Dissolved Solids （salinity） 0.5 mg/L ... 300 g/L NaCl）
With "Frequency auto", the 712 Conductometer automatically selects the measurement frequency best suited to the sample （300 Hz or 2.4 kHz）
"Auto zero" sets the current conductivity to zero. Changes can thus be followed with a higher resolution
The freely selectable reference temperature allows matching to the measurement instructions of many different standards
The switching, alarm or limit outputs, which can be used in all measurement modes as a minimum/maximum make or break contact with hysteresis adjustment, are popular additional functions for open- and closed-loop control tasks. You thus save, among other things, an expensive controller.
Meets the requirements of USP, GLP, ISO 9000

The innovative Conductometer for the measurement of conductivity, temperature and TDS （Total Dissolved Solids）, as well as for the indication of conductometric titrations.

Measuring range
Conductivity 0.001 microsiemens/cm to
20 siemens/cm
Temperature （Pt100/Pt1000） - 170 ... + 500 °C
TDS （Total Dissolved Solids） 0.5 mg/L ... 300 g/L NaCl

Automatic determination of the cell constant and the temperature coefficient of the sample
Automatic temperature compensation for conductivity measurements
High Resolution in conductivity and temperature measurements, due to built in compensation and «Auto Zero» function
Current output for platinisation of conductivity measuring cells （Iplat = 20 mA）
Manual or automatic selection of measuring frequency
Analogue output with programmable range
Bi-directional RS 232C interface for PC or printer （results and reports）
Real-time plot function of conductivity and temperature versus time on printer
I/O lines for limit values （min/max） and sample changer